19 April 2012

Mt. Baker Backcountry

My first ever backcountry ski day was a 2-day epic trip to Mt. Baker. Some friends were renting a cabin up at the mountain and I was lucky enough to get an invite!

The weekend of February 18-19 it was DUMPING snow. Seriously, look at this:

Can you call that ass deep?
It was deep!The snow was also super fluffy and awesome for skiing. I was a happy camper! 

First run, so fluffy!
My partner for the day was Imran, a very experienced (and patient) backcountry aficionado who shared his backcountry enthusiasm with me. I am very grateful to him for breaking trail and showing me how to make safe, educated decisions.

What did I learn my first day?! How to put on skins (you store them in your jacket when you are making laps, thus the "square" look to my jacket pictured above), how my new bindings functioned, how to track a beacon, and how to NOT layer your clothes. You get pretty hot skinning up a mountain it turns out, and you have to save room in your pack for those discarded layers. Who knew?

Lake Basin at the bottom of our route. I love how quiet snow makes everything.

The 2nd day of our ski adventure started with a bang when I forgot lunch at the condo. Never fear, that's why you keep a bag of stale bread in the car! We skinned up, took a run down, and stopped for "lunch".

Who's hungry?
After fueling up (if you can call it that) we went back up to take another lap. I already posted this video, but here is the picture of (at the time) the best 8 turns of my life. Yes, I did face plant at the bottom, but only because there was TOO MUCH SNOW!

My tracks are clearly the more awesome looking ones, ending in a deep hole

My favourite part of the whole trip? Besides skiing in freshies, being outside, and getting an awesome workout? Meeting so many other peeps who love BC skiing too! It was just Imran and I partnered for the day, but look at all the great people we ran into - including my friend Ben, who I know from running group!

Party - Backcountry Style

13 April 2012

Australian Rappel

An Australian Rappel is when you rappel down a rock face with the belay device in your back belay loop, vs. your front belay loop*. Instead of lowering yourself with your back to the ground, you are going face first.

I learned how to rig this up a few years ago and, on the one-month countdown to my birthday, I thought I'd share this newly found "demonstration" video at Infinite Bliss, a 23 pitch 5.5-10c sport climb on Mt. Garfield. We didn't top out that day, but we sure did have a fun time rappelling down!


And yes, I do realise my Ozzie accent is terrible in this video, but two years later it really is MUCH improved! No, REALLY!

*Disclaimer: Not all harnesses come with a rear belay loop. DO NOT try this unless you are with an experienced professional and you have guaranteed that your harness has a safety rated rear belay loop.

10 April 2012

Introduction to Backcountry Skiing

I have developed a pattern of taking up a new (and sometimes "extreme") sport every few years. I started rock climbing in 2007, I adopted the forefoot strike and discovered that I really, really love running in 2009, then I bought a bike and started cycling in 2011....with mixed results.

In 2012, I looked to the mountains for my next challenge. What did I find? Backcountry Skiing. Yes, you read that correctly. I, Kristina, who didn't even like to hike much a few years ago, now like to climb mountains (on skis) in order to make awesome turns on the way down.

Like most of my favourite activities, BC Skiing (as it's known) has a lot of gear. What gear do you need to ski in the backcountry you say? I'm glad you asked! Much like my Climbing Terms blog, I'll go through all of the terms for BC skiing then you'll be set up nicely for my future blogs with pictures of all of the sweet lines I've been able to ski this season (8 days since February 18).

What you need for Backcountry Skiing - The Basics
First and foremost you need BC skis, skins, boots and bindings. Much to my dismay, the three pairs of skis and extra ski boots I already own were not what I needed to hit the backcountry, so I went shopping. I did some research then found the skis (and skins) I wanted on a gear-swap site. Score!

Mine are the pretty blue Sirens by G3

The main difference between BC and downhill skis is weight. The say that 1lb on your foot is equivalent to 10lbs on your back, so it's really important to keep the weight on your feet to a minimum. This same weight idea applies to boots and bindings as well.

For bindings, there are two types: bindings that hinge at the toe and look like standard downhill bindings, or special backcountry bindings that "pin" into your boots.

 Full Hinge BC Bindings
Dynafit binding - locked into toe piece, on 1st riser of heel
Many BC skiers choose to go with the Dynafit "pin" bindings because they are much lighter, and I was no exception. To use Dynafits, the BC Boots have "holes" in the toe piece where the Dynafit pins lock, allowing the hinge motion. All you have to do is step on the toe piece and it locks down. The heel piece swivels for four different modes: Ski, Flat Touring, Elevated Touring, and REALLY Elevated Touring. Hinge bindings (along with Telemark and Splitboard bindings) also have different riser levels to ease uphill travel. Basically it's like having adjustable high heels on your feet. The risers "flatten out" the terrain you are navigating.

Ladies you'll get this: it's easier to walk up a hill in heels than in flat shoes! Why? Because the heels essentially flatten out the hill for you! Now walking downhill in heels is another story....

Scarpa Gea - A Girls' Best Friend

With boots, again you want to go with something that is lightweight. I chose the Scarpa Gea's because they fit well, but they are also one of the best boots out there. The main difference between BC boots and downhill boots (other than the toe pin) is "walk mode". You can flip a lever in the back of the boot that locks or unlocks the heel angle, so you can give yourself much greater range of motion, which makes walking and skinning that much easier.

Skins come in a variety of eye catching designs

Now that you have the basics, how do you get uphill? Well you certainly don't boot pack (that would be ridiculous). Enter: Skins! Skins provide friction for you on the way up, gripping the snow so you don't slide backwards. Skins are the length of the ski, super adhesive on one side, and have hair on the other side. The hair feels just like horse hair (only plastic), soft when you rub it one way, and prickly/friction-providing when you rub the other way.

To apply, you loop the top of the skin over your ski, smooth it down, and clip it around the back. As mentioned, they are super adhesive, so as long as you take good care of your skins, they can last many seasons. Then you step into your bindings, and you are good to go!

What you need for Backcountry Skiing - Safety
One reason I waited so long to start BC skiing, besides the obvious financial investment, is my lack of knowledge about safety in the backcountry. As you've probably seen in the news, it's been a record year for avalanches, and, even when you're careful and exercise all of the right precautions, avalanches can sweep you up in an instant.

Most people take an Avalanche (Avy) Course before they start BC skiing. When I geared up in mid-February it was too late in the season to sign up fora course, so I have been sure to go with people who are SUPER knowledgeable, conservative, and safe, to assure that I make the very best decisions possible. In my impromptu "classes" I've learned to dig a pit, probe for bodies, do a beacon search, and gauge the avy danger of a snow field based off of it's slope (angle), aspect (which way does it face? north? west?), and other risk factors (are there trees? cliffs? cornices?) I still have a lot to learn, but I'm very grateful to my patient teachers!

Backpack, Shovel, Probe, Beacon

Gear: At a minimum you need a Shovel, Beacon, and Probe to be in the backcountry, and probably a backpack to carry it all. The beacon is worn close to the body and it has two modes: Transmit and Search. You turn it on and leave it on transmit for the duration of your day. This way, if someone is buried in an avalanche, the other skiers turn their beacons to search to find the lost party.

Once the avy victim(s) location beneath the snow has been determined (using proper searching technique), the search party will use the probe (an expandable pole) to probe into the snow to feel for a body. Once the body has been located, the digging begins.

I hope to never need these pieces of safety equipment, but anyone going into the BC should be versed and experienced using them.

What you need for Backcountry Skiing - Wish List Items
I ended up buying some other gear. While not 100% necessary, I'm 90% sure you'll want this stuff. Consider:
  • BC Poles: these are stronger than collapsible trekking poles, as they only adjust in one place instead of two, and they have bigger baskets at the bottom
  • Helmet: I've taken to wearing my climbing helmet lately, but they make bc specific helmets
  • Zippered Pants: My first few outings I wore my "resort" ski pants and I nearly died of overheating. Buy ones with zips along the side that are NOT insulated
  • Ski Crampons: This past weekend I had the pleasure of skinning up an ice field, sans crampons. It was horrible. Needless to say, I've got some in the mail. 
Okay, are you tired of reading? Did you even GET this far? If you did, congrats! Here is your reward, video of my first day EVER skiing in the backcountry - can you see why it's easy to get addicted???